Juno JKG7463 User Manual download pdf (Page 7)

Electrical connection

Before plugging in, ensure that the voltage and

frequency shown on the serial number plate

correspond to your domestic power supply. Voltage

can vary by ±6% of the rated voltage.

For operation with different voltages, a suitably sized

INSTALLATION

Location

The appliance should be installed well away from

sources of heat such as radiators, boilers, direct

sunlight etc.

CUSTOMER SERVICE AND SPARE PARTS

If the appliance is not functioning properly, check

that:

¥ the plug is firmly in the wall socket and the mains

power switch is on;

¥ there is an electricity supply (find out by plugging

in another appliance);

¥ the thermostat knob is in the correct position.

¥ If there are water drops on the bottom of the

cabinet, check that the defrost water drain

opening is not obstructed (see ÒDefrostingÓ

section).

¥ If your appliance is still not working properly after

making the above checks, contact the nearest

service centre.

To obtain fast service, it is essential that when you

apply for it you specify the model and serial number

of your appliance which can be found on the

guarantee certificate or on the rating plate located

inside the appliance, on the bottom left-hand side.

D037

The freezer compartment, however, will become

progressively covered with frost. This should be

removed with the special plastic scraper provided,

whenever the thickness of the frost exceeds 4 mm.

During this operation it is not necessary to switch off

the power supply or to remove the foodstuffs.

However, when the ice becomes very thick on the

inner liner, complete defrosting should be carried out

and it is advisable to carry out this operation when

the appliance is empty.

To carry out complete defrosting of the freezer

compartment proceed as follows:

1. pull out the plug from the wall socket or turn the

thermostat knob to the ÇOÈ setting;

2. remove any stored food, wrap it in several layers

of newspaper and put it in a cool place;

3. leave the door open, insert the plastic scraper in

the appropriate seating at the bottom centre,

placing a basin underneath to collect the defrost

water;

4. when defrosting is completed, dry the interior

thoroughly and refit the plug; keep the scraper for

future use;

5. turn the thermostat knob back to the required

setting or replace the plug in the power socket.

After letting the appliance run for at least half an

hour, replace the previously removed food into

the compartment.

Important:

Never use sharp metal tools to scrape off frost

from the evaporator as you could damage it.

Do not use a maechanical device or any artificial

means to speed up the thawing process other

than those recommended by the manufacturer.

A temperature rise of the frozen food packs,

during defrosting, may shorten their safe

storage life.

D068

1 2 3 4 5 6 7 8 9 10 11

Comments to this Manuals

No comments

Juno JKG7463 User Manual Page 7

Comments to this Manuals

Related products and manuals for Fridge-freezers Juno JKG7463