Juno JKI9050 User Manual download pdf (Page 14)

What to do if ...

Correcting Malfunctions

A malfunction may be caused by only a minor fault

that you can rectify yourself using the following

instructions. Do not perform any other work on the

appliance if the following information does not provide

assistance in your specific case.

Warning! Repairs to refrigerators/freezers

may only be performed by qualified service

engineers. Improper repairs can give rise to

significant hazards for the user. If your appli-

ance needs repairing, please contact your

specialist dealer or our Customer Service.

Malfunction Possible Cause Remedy

Appliance does not work.

Appliance is not switched on. Switch on the appliance.

Mains plug is not plugged in or is

loose.

Insert mains plug.

Fuse has blown or is defective. Check fuse, replace if necessary.

Socket is defective.

Mains malfunctions are to be cor-

rected by an electrician.

Appliance cools too much. Temperature is set too cold.

Turn the temperature regulator to a

warmer setting temporarily.

The food is too warm.

Temperature is not properly adjusted.

Please look in the "Starting Up - Set-

ting the temperature" section.

Door was open for an extended

period.

Open the door only as long as neces-

sary.

A large quantity of warm food was

placed in the appliance within the last

24 hours.

Turn the temperature regulator to a

colder setting temporarily.

The appliance is near a heat source.

Please look in the "Installation Loca-

tion" section.

Interior lighting does not work. Light bulb is defective.

Please look in the "Changing the Light

Bulb" section.

Heavy build up of frost, possi-

bly also on the door seal.

Door seal is not air tight (possibly after

changing over the hinges).

Carefully warm the leaking sections of

the door seal with a hair dryer (not

hotter than approx. 50 °C).Atthe

same time shape the warmed door

seal by hand such that it sits correctly.

The compressor does not start

immediately after changing the

temperature setting.

This is normal, no error has occurred.

The compressor starts after a period

of time.

Water on the floor or on stor-

age shelves.

Water drain hole is blocked.

See the "Cleaning and Maintenance"

section.

1 2 ... 9 10 11 12 13 14 15 16 17 18

Comments to this Manuals

No comments

Juno JKI9050 User Manual Page 14

Comments to this Manuals

Related products and manuals for Fridges Juno JKI9050